INJECTION MOLDING
MACHINES
Injection molding machines are sorted according to
tonnage. Machines with a camera graphic next to them have videos available.
Please requests for videos to be sent to you at
frank@acmeplasticfl.com
 BOY
24.2-TON PARTING LINE PLASTIC INJECTION MOLDING MACHINE, MODEL 22SVH, 1 OZ (28
GRAMS), 1991, DIPRONIC CONTROLS, 10" x 10" (254 MM x 254 MM) TBS, 9.84" x
12" (250 MM x 304 MM) PLATENS, 15.75" (400 MM) MAX. DAYLIGHT, 7.3 HP MOTOR
AT 220V, DIMS: 7'5"L x 2'6"W x 5'2"H, WEIGHT: 2,000 LBS.,
43,896 OPERATING HOURS ON JANUARY 5TH, 2011, DECOMPRESSION OPTION
ARBURG UNIVERSAL
40-TON PLASTIC INJECTION MOLDING MACHINE, MODEL 270M350-90U, 2.05 OZ
(58 GM), 30 MM SCREW, 1995, MULTRONICA CONTROLS, 10.63" x 10.63" (270 MM x
270 MM) TBS, 15.75" x 15.75" (400 MM x 400 MM) PLATENS, 21.65" (550 MM) MAX.
DAYLIGHT, DIMS: 146"L x 69"W x 76"H, APPROXIMATE WEIGHT: 3,792 LBS.
ENGEL
40-TON, MODEL 150/40ST, MACHINE #52, 1986, EC88 CONTROLS, 12.01" x
12.01" (305 MM x 305 MM) TBS, 16.73" x 16.73" (425 MM x 425 MM) PLATENS,
18.9" (480 MM) MAX. DAYLIGHT, DIM: 11'2" x 3'11"W x 5'6"H, WEIGHT: 4,409
LBS.
NISSEI
44-TON, NISSEI 44-TON, MODEL NS40-5A-NC21, 1.55 OZ (44 GRAMS), 26 MM
(B) SCREW, 1995, NC-21 CONTROLS, 12.2" x 12.2" (310 MM x 310 MM) TBS, 17.72"
x 17.72" (450 MM x 450 MM) PLATENS, 17.7" (450 MM) MAX DAYLIGHT, WIRED 460
VOLTS, DIMS: 110.5"L x 30.9"W x 62.4"H, WEIGHT: 2976 LBS., 8,649,345 SHOTS,
PRESENTLY UNDER POWER
BATTENFELD
51-TON, MODEL BA460/170, 2.8 OZ (79 GRAMS), 1.38" (35 MM) SCREW,
1985, RETROFITTED ALLEN BRADLEY CONTROLS IN 2001, 11.89" x 11.89" (304 MM x 304 MM) TBS, 18.9" x
18.9" (480 MM x 480 MM) PLATENS, 20.67" (525 MM) MAX. OPEN DAYLIGHT, 20 HP
MOTOR, DIM: 11'5"L x 4'W x 6'4"H, WEIGHT: 5,512 LBS. 25TH,
2009
ARBURG
55-TON PLASTIC INJECTION MOLDING MACHINE, MODEL 320 M 500-210 U, 3.2
OZ (91 GRAMS), MAN. IN 1993, MULTRONICA CONTROLS, 12.60" x 12.60" (320 MM x
320 MM) TBS, 24.60" (625 MM) MAX. DAYLIGHT, 19.29" x 19.29" (490 MM x 490
MM) PLATENS, 15 HP MOTOR WIRED AT 460V, DIMS: 167"L x 44"W x 79"H IN
HORIZONTAL POSITION, WEIGHT: 5,422 LBS., INCLUDES AEC 9KW MOLD TEMPERATURE
CONTROLLER AND STAHL OVERHEAD CRANE
ENGEL
55-TON, MODEL ES200/55, 3.38 OZ (96 GRAMS), 30 MM SCREW, 1991, EC88
CONTROLS, 12.01" x 12.01" (305 MM x 305 MM), 16.93" x 16.93" (430 MM x 430
MM) PLATENS, 18.9" (480 MM) MAX. DAYLIGHT, 20 HP MOTOR, DIM: 11'3"L x 4'W x
6'H, WEIGHT: 6,549 LBS.
ARBURG
66-TON
ALLROUNDER PLASTIC INJECTION MOLDING MACHINE, MODEL 370C 600-100, 1.7
OZ (48 GRAMS), MAN. IN 1992, DIALOGIC CONTROLS, 14.57" x 14.57" (370 MM x
370 MM) TBS, 29.53" (750 MM) MAX. DAYLIGHT, 21.46" x 21.46" (545 MM x 545
MM) PLATENS, 20 HP MOTOR WIRED AT 480V, DIMS: 150"L x 42"W x 70"H, WEIGHT:
7,937 LBS., INCLUDES AEC MODEL AE-ST-650T PNEUMATIC SPRUE PICKER AND ACME 15
KVA TRANSFORMER
ARBURG
66-TON PLASTIC INJECTION MOLDING MACHINE, MODEL 320 C 600-200, 3.49
OZ (99 GRAMS), MAN. IN 1996, DIALOGIC CONTROLS, 12.60" x 12.60" (320 MM x
320 MM) TBS, 21.65" (550 MM) MAX. DAYLIGHT, 15.94" x 15.94" (405 MM x 405
MM) PLATENS, 20 HP MOTOR WIRED AT 230V, DIMS: 120"L x 50"W x 65"H IN
HORIZONTAL POSITION, WEIGHT: 5,291 LBS., INCLUDES STERLCO 12KW MOLD
TEMPERATURE CONTROLLER AND STAHL OVERHEAD CRANE
NEWBURY
75-TON, MODEL H3-75RS, 1969, 3 OZ (85 GRAMS), RELAY CONTROLS, 8" x
12.25" (203 MM x 311 MM) TBS, 17.75" x 14" (451 MM x 356 MM) PLATENS, 15 HP
MOTOR, DIMS: 10'L x 3'W x 6'H, WEIGHT: 4,800 LBS.
NEWBURY
75-TON, MODEL H3-75RS, 1970, 3 OZ (85 GRAMS), RELAY CONTROLS, 8" x
12.25" (203 MM x 311 MM) TBS, 17.75" x 14" (451 MM x 356 MM) PLATENS, 15 HP
MOTOR, DIMS: 10'L x 3'W x 6'H, WEIGHT: 4,800 LBS.
NEWBURY 80-TON
4-STATION ROTARY C-FRAME VERTICAL PLASTIC INJECTION MOLDING MACHINE,
MODEL 80-VTCR5, 5 OZ (142 GRAMS), MAN. IN NOVEMBER 2001, PATHFINDER 5000
CONTROLS, 48" (1,219 MM) ROTARY TABLE, 6.4" (162 MM) CLAMP STROKE, 12" x 14"
(304 MM x 356 MM) MAX. MOLD SPACE, 20.38" (528 MM) MAX DAYLIGHT, 8" (203 MM)
MIN MOLD HEIGHT, EQUIPPED WITH LIGHT CURTAIN, 25 HP MOTOR WIRED AT 208
VOLTS, DIM: 10.2'L x 6.7'W x 8.4'H, APPROXIMATE WEIGHT: 9,500 LBS., 35,000
APPROXIMATE OPERATING HOURS ON 07/21/2011, INCLUDES THE OPTIONS OF CORE
PULL, ROBOT INTERFACE, SKIP STATION, CAVITY PRESSURE SENSOR, OSCILLATING
TABLE, SKIP STATION, FEED THROAT TEMPERATURE CONTROL, CLAMP TONNAGE CONTROL,
BIMETALLIC BARREL
ARBURG
82-TON PLASTIC INJECTION MOLDING MACHINE, MODEL 320M-750-210, 3.4 OZ
(96 GRAMS), MAN. 1/1993, MULTRONICA CONTROLS, HYD KO, 12.6" x 12.6" (320 MM
x 320 MM) TBS, 19.3" x 19.3" (490 MM x 490 MM) PLATENS, DIM: 13'11"L x 3'8"W
x 6'7"H, WEIGHT: 5,422 LBS., OPTIONS INCLUDE ROBOT INTERFACE
ENGEL
82.5-TON, MODEL ES240/80, 5.2 OZ (147 GRAMS), 1990, CC90 CONTROLS,
13.62" x 13.62" (346 MM x 346 MM) TBS, 20.8" x 21.73"
(510 MM x 552 MM) PLATENS, 35 MM SCREW, DIM: 167"L x 58"W
x 80"H, WEIGHT: 8,500 LBS.
CINCINNATI
85-TON PLASTIC INJECTION MOLDING MACHINE,
MODEL VT85-9, 9 OZ (255 GRAMS), MAN. IN 1989, VLC
CONTROLS, 27.95" (710 MM) MAX. DAYLIGHT, 15.94" x 14.17" (405 MM x 360 MM)
TBS, 24.41" x 22.54" (620 MM x 573 MM) PLATENS, 20 HP MOTOR WIRED AT 460V,
DIM: 167.2"L x 51.7"W x 83.5"H, WEIGHT: 8,180 LBS., 60,412 OPERATING HOURS
ON OCTOBER 28TH, 2010
MULTIPLAS
ROTARY 85-TON VERTICAL THERMOSET PLASTIC INJECTION
MOLDING MACHINE, MODEL VC-85T-4R-8L, 8 OZ, MAN. IN 1988, AB SLC 150
CONTROLS
NIIGATA ALL-ELECTRIC 85-TON,
MODEL MD85S-3, 3.07 OZ (87 GRAMS), MAN. IN 2000, 14.17" x 14.17" (360 MM x
360 MM) TBS, 20.87" x 20.87" (530 MM x 530 MM) PLATENS, 14.96" (380 MM) MAX.
MOLD HEIGHT, DIMS: 154.7" x 40.6" x 66.9", WEIGHT: 3.5 US TONS, MACHINE IS
WIRED 220V, OPTIONS INCLUDE HYD KO
VAN
DORN 85-TON PLASTIC INJECTION MOLDING MACHINE, MODEL 85-HT-2.3, 2.3
OZ (65 GRAMS), 25.4 MM SCREW, MAN. IN JUNE 1996, PATHFINDER 2500 CONTROLS,
16" x 13.6" (406 MM x 345 MM) TBS, 22.8" x 20.4" (579 MM x 518 MM) PLATENS,
28" (711 MM) MAX. DAYLIGHT, 15 HP MOTOR, DIM: 14.7'L x 4.3'W x 5.5'H,
WEIGHT: 9,500 LBS., 9,690 OPERATING HOURS ON CONTROLLER ON 08/12/2011
(ACTUAL HOURS MAY BE CLOSER TO 53,005 OPERATING HOURS), OPTIONS INCLUDE CORE
PULL, SPI ROBOT INTERFACE, MOTION/NO MOTION, CLAMP TONNAGE CONTROL, CAVITY
PRESSURE TRANSDUCER, TIE-BARS MAY HAVE WEAR AFTER 15 YEARS OF USE
NISSEI 110-TON VERTICAL, MODEL
TD100R18ASE, MACHINE #110-3, 5 OZ (142 GRAMS), 1997, NC9000G CONTROLS, "A"
SCREW (36 MM), 16.875" (429 MM) MAX. DAYLIGHT, 25.4" x 16.1" (645 MM x 409
MM) UPPER DIE PLATE DIMENSION, CORE PULL A & C, 26,006 RUNNING HOURS ON
06/28/2007, DIMS: 12'10"L x 4'11"W x 8'8"H, WEIGHT: 12,600 LBS., WIRED AT
480V
VAN
DORN 120-TON PLASTIC INJECTION MOLDING MACHINE,
MODEL 120HT6, 6 OZ (170 GRAMS), MAN. IN 10/1996, PATHFINDER 45000 CONTROLS,
17" x 17" (432 MM x 432 MM) TBS, 25" x 25" (635 MM x 635 MM) PLATENS, 30"
(762 MM) MAX. DAYLIGHT, 20 HP MOTOR WIRED AT 230V, DIM: 15.3'L x 4.3'W x
6.8'H, WEIGHT: 9,500 LBS., 82,338 OPERATING HOURS 12/30/2011, OPTIONS
INCLUDE CORE PULL, SPI ROBOT INTERFACE, MOTION/NO MOTION, CLAMP TONNAGE
CONTROL, CAVITY PRESSURE TRANSDUCER
VAN
DORN 120-TON PLASTIC INJECTION MOLDING MACHINE,
MODEL 120HT-8, 8 OZ (227 GRAMS), MAN. IN 1997, PATHFINDER 25000 CONTROLS,
17" x 17" (432 MM x 432 MM) TBS, 25" x 25" (635 MM x 635 MM) PLATENS, 30"
(762 MM) MAX. DAYLIGHT, DIMS: 15'3'L x 4'3"W x 6'6"H, WEIGHT: 13,000 LBS.,
47,382 OPERATING HOURS ON SEPTEMBER 28TH, 2011,
OPTIONS INCLUDE CORE PULL, AIR BLOW
NEWBURY 125-TON
VERTICAL ROTARY, MODEL HV5-125RS, 5 OZ (142 GRAMS), 1987, MOOG MOPAC
CONTROLS
REED
150-TON PLASTIC INJECTION MOLDING MACHINE,
MODEL 150TG, 5.5 OZ (156 GRAMS), 1981, PM2000 CONTROLS, TOGGLE CLAMP, 17" x
17" (432 MM x 432 MM) TBS, 25.5" x 25.5" (648 MM x 648 MM) PLATENS, DIM:
14'3"L x 5'9"W x 6'10"H, WEIGHT: 11,500 LBS.
CINCINNATI
165-TON PLASTIC INJECTION MOLDING MACHINE, MODEL VT165-13, 13 OZ
(367 GRAMS), 1986, CAMAC VLC CONTROLS, 17.9" x 16.7" (455MM x 425MM) TBS,
26.8" x 25.6" (680MM x 650MM) PLATENS, 35.8" (910MM) MAX. DAYLIGHT, 25 HP
MOTOR, 71,645 RUNNING HOURS, DIM: 17'8"L x 4'7"W x 7'3"H, WEIGHT: 14,500
LBS., 75,019 HOURS ON OPERATING HOURS ON OCTOBER 28TH, 2010
NETSTAL 168-TON,
MODEL N300/150, MACHINE #23, 6.8 OZ (193 GRAMS), 1985, C-MOS CONTROLS, 18.1"
x 18.1" (460 MM x 460 MM) TBS, CORE PULL, WEIGHT: 16,535 LBS.,
USD $107,767 WHEN PURCHASED NEW
VAN DORN 170-TON PLASTIC
INJECTION MOLDING MACHINE, MODEL 170-RS-14F-HT, 8 OZ (227 GRAMS), MAN. IN
10/1992, SIEMENS EL CONTROLS, 20" x 20" (508 MM x 508 MM) TBS, 30.5" x 32"
(775 MM x 813 MM) PLATENS, 35" (889 MM) MAX. DAYLIGHT, 25 HP MOTOR, DIM:
19.7'L x 4.5'W x 6.7'H, WEIGHT: 18,000 LBS., CORE PULL, SPI ROBOT INTERFACE
JSW
200-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE, MODEL
J200ELII, 9.6 OZ (272 GRAMS), 1.81" (46 MM) SCREW, MAN. IN SEPTEMBER 1999,
20.87" x 20.87" (530 MM x 530 MM) TIE BAR SPACING, 30.71" x 30.71" (720 MM x
720MM) PLATENS, 37" (940 MM) MAX. DAYLIGHT, 8.66" (220 MM) MIN. MOLD HEIGHT,
19.68" (500 MM) MAX. MOLD HEIGHT, 17.32" (440 MM) CLAMP STROKE, 5.11" (130
MM) EJECTION STROKE, DIMS: 18.11'L x 4.53'W x 6.2'H, WEIGHT: 17,820 LBS.,
62,847 OPERATING HOURS ON 12/29/2011, OPTIONS INCLUDE CORE PULL OUTPUTS AND
LIMIT SWITCHES ONLY AND NOT HYDRAULIC CORE PULL POWER PACK, PNEUMATIC
VALVE GATE, AIR EJECT, SPI ROBOT INTERFACE
NEWBURY
200-TON, MACHINE #4, MODEL H14-200RS, 14 OZ (397 GRAMS), 1977, RELAY
CONTROLS, 18" x 18" (457 MM x 457 MM) TBS, 27.5" x 28" (699 MM x 711 MM)
PLATENS, 20" (508 MM) MAX. DAYLIGHT, 30 HP MOTOR, DIMS: 19'L x 5'W x 7'H,
WEIGHT: 13,900 LBS.
TOSHIBA
225-TON PLASTIC INJECTION MOLDING MACHINE, MODEL ISC225, 19.2 OZ
(544 GRAMS), MAN. ON AUG. 1978, RELAY CONTROLS, 21.25" (540 MM) H x 17.3"
(440 MM) V TIE BAR SPACING, 31.1" (790 MM) H x 27.16" (690 MM) V PLATENS,
9.45" (240 MM) CLOSED DAYLIGHT, 31.5" (800 MM) WITHOUT SPACER MAX. DAYLIGHT,
39.37" (1000 MM) WITH SPACER MAX. DAYLIGHT, DIMS: 20'L x 4.9'W x 6.9'H,
WEIGHT: 17,600 LBS.
REED
250-TON, MODEL 250TG, 20 OZ (567 GRAMS), 1979, PM 2000 CONTROLS, 22" x
22" (559 MM x 559 MM) TBS, 33" x 33" (838 MM x 838 MM) PLATENS, 42.5" (1080
MM) MAX. DAYLIGHT, 40 HP MOTOR, DIM: 18'2"L x 6'1"W x 7'2"H, WEIGHT: 18,500
LBS.
VAN DORN 250-TON,
MODEL 250-RS-30F, 1978, 30 OZ (850 GRAMS), SCI CONTROLS, 22" x 22" (559 MM x
559 MM) TBS, 33" x 36" (838 MM x 914 MM) PLATENS, 50 HP MOTOR, DIM: 20.7'L x
5'W x 8.1'H, WEIGHT: 23,900 LBS.
NISSEI
289-TON, MODEL FS260S71ANE, 23.5 OZ (666 GRAMS), 2.48" (63 MM) B
SCREW, 1986, NPC-FFC1 CONTROLS, 24.1 x 24.1 (615 MM x 615 MM) TBS, 35.6" x
35.6" (905 MM x 905 MM) PLATENS, 45.3" (1150 MM) MAX. DAYLIGHT, 40 HP MOTOR,
DIM: 24'8"L x 4'7"W x 6'H, WEIGHT: 22,600 LBS., HYD KO, 4 SEQUENCE CORE PULL
VAN
DORN 300-TON, MODEL 300-RS-30F, 30 OZ (850 GRAMS), 1985, SCI CONTROLS,
24" x 24" (610MM x 610MM) TBS, 39" x 36.5" (991 MM x 927 MM) PLATENS, 46"
(1168 MM) MAX. DAYLIGHT, 50 HP MOTOR, DIM: 21'L x 5'W x 7.5'H, WEIGHT:
26,400 LBS.
JSW
385-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE, MODEL
J385ELII, 460H INJECTION UNIT, 17.8 OZ (505 GRAMS), 2.28" (58 MM) SCREW,
SYSCOM 1000 CONTROLS, MAN. IN MAY 1999, 28.7"x 28.7" (729 MM x 729 MM) TBS,
42.7" x 42.3" (1085 MM x 1075 MM) PLATENS, 49.998" (1270 MM) MAX. DAYLIGHT,
11.81" (300 MM) MIN. MOLD HEIGHT, 26" (660 MM) MAX. MOLD HEIGHT, 5.906" (150
MM) STROKE EJECTION, DIMS: 22.38'L x 5.74'W x 7.97'H, APPROXIMATE WEIGHT:
38,600 LBS., 47,638 OPERATING HOURS ON 12/29/2011, OPTIONS INCLUDE CORE PULL
OUTPUTS AND LIMIT SWITCHES ONLY AND NOT HYDRAULIC CORE PULL POWER PACK, PNEUMATIC VALVE GATE, AIR EJECT
JSW
385-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE, MODEL
J385ELII, 460H INJECTION UNIT, 17.8 OZ (505 GRAMS), 2.28" (58 MM) SCREW,
MAN. IN JUNE 1999, 28.74" x 28.74" (730 MM x 730 MM) TBS, 42.72" x 42.72"
(1085 MM x 1085 MM) PLATENS, 50" (1270 MM) MAX. DAYLIGHT, 11.81" (300 MM)
MIN. MOLD HEIGHT, 26.38" (670 MM) MAX. MOLD HEIGHT, 23.62" (600 MM) CLAMP
STROKE, 5.91" (150 MM) STROKE EJECTION, DIMS: DIMS: 22.38'L x 5.74'W x
7.97'H, APPROXIMATE WEIGHT: 38,600 LBS., 52,339 OPERATING HOURS ON
12/29/2011, OPTIONS INCLUDE CORE PULL OUTPUTS AND LIMIT SWITCHES ONLY AND
NOT HYDRAULIC CORE PULL POWER PACK, PNEUMATIC VALVE GATE, AIR EJECT
SUMITOMO
385-TON PLASTIC INJECTION MOLDING MACHINE, MODEL SH350C, C2500L
INJECTION UNIT, 28.5 OZ (808 GRAMS), 2.48" (63 MM) SCREW DIAMETER, MAN. IN
SEPTEMBER 1998, N-VII CONTROLLER, 29.92" x 27.95" (760 MM x 710 MM) TBS,
42.13" x 40.55" (1070 MM x 1020 MM) PLATENS, 53.94" (1370 MM) MAX. DAYLIGHT,
DIM: 24.6'L x 6.3'W x 7.9'H, WEIGHT: 25,300 LBS., MACHINE MOTOR AND HEATERS
ARE WIRED AT 480V, 31,646 OPERATING HOURS ON 01/03/2012, OPTIONS INCLUDE
CORE PULL, ROBOT INTERFACE, VALVE GATE, AIR EJECT
VAN DORN 400-TON
PLASTIC INJECTION MOLDING MACHINE, MODEL 400HT-RS-14F, 14 OZ (397
GRAMS), MAN. 08-1993, CRT-B CONTROLS, 28" x 28" (711 MM x 711 MM) TBS, 42" x
42" (1067 MM x 1067 MM) PLATENS, 60 HP MOTOR WIRED AT 480V, DIM: 25.8'L x
5.5'W x 8.4'H, WEIGHT: 37,800 LBS., OPTIONS INCLUDE ROBOT INTERFACE, AIR
EJECT AND HOT RUNNER CONTROLLER, MACHINE HAS A BROKEN PUMP
|
